360 Tower Fan Model No: OZF5 The images in this manual are for illustration purposes only and may vary slightly from actual product.
Important Safety Instructions Thank you for purchasing the Ozeri 360 Tower Fan. This product has passed extensive quality assurance tests for residential use. Every care has been taken to ensure that it reaches you in perfect condition.
If the electric cable is damaged, it must be replaced by the manufacturer, its after-sales service or by a similar qualified person in order to avoid danger. This product is intended for household use ONLY and not for commercial, industrial or outdoor use. Do not use this fan with any solid state speed control devices. Avoid contact with moving fan parts. Do not use this fan in a damp area such as a bathroom. Place the fan on a dry level surface.
Parts of the Fan 1. Remote Control Compartment with Control Panel 2. LED Display 3. Grille 4. Base 5. Remote Control 1 2 [01]x1 3 4 5 Assembly Instructions Check contents – keep packaging and user instructions for future reference. [02]x2 STEP 1: Assemble the base by aligning the two half circle pieces together.
STEP 2: Hold the base upright (the side with a smooth surface) and thread the power cord through the center hole. Bring it up to meet the fan and ensure that the screw holes on both are aligned. Secure together with the 3 screws provided. COMPLETED FAN CAUTION: THIS FAN MUST OPERATE IN THE UPRIGHT POSITION ONLY. DO NOT LAY FAN ON ITS SIDE OR IN ANY OTHER POSITION. DOING SO MAY CAUSE DAMAGE TO THE FAN AND/OR PERSONAL PROPERTY. DO NOT USE THIS FAN WITHOUT ITS BASE. Operating Instructions 1.
Speed: Choose from 3 comfort settings (HIGH, MED, LOW) by pressing this button until the speed you want is indicated on the LED display. Timer: This button sets the duration of operation before the fan automatically turns OFF. Pressing this button will increase the time of operation in 30 minutes increments to a maximum of 8 hours. The time selected will be displayed on the LED screen.
Color LED Display Wind Speed: Slow, Med, High Mode: MODE Timer Normal Nature Sleep Temperature Thermostat Note: For fans purchased in the USA, the LED screen will display the room temperature in Fahrenheit. Guidelines for user servicing 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord 2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades or Push on tabs located next to the blades 3. Remove fuse carefully. 4.
Guidelines for using the remote control The remote control must be pointed towards the receiver on the fan in order to work. The remote control may not operate in a room where a heavy machine is operating. Do not block the line of sight between the remote control and the receiver. Handle the remote control with care. Do not drop the remote Guidelines for use of batteries If the remote control will not be used for a long period of time, remove the battery from the battery compartment.
CAUTION: THIS FAN HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER). TO REDUCE THE RISK OF ELECTRICAL SHOCK, THIS PLUG IS INTENED TO FIT IN A POLARIZED OUTLET ONLY ONE WAY. MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT OF THE OUTLET. FULLY INSERT. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. DO NOT ATTEMPT TO BYPASS THIS SAFETY FEATURE. NOTE: THIS FAN IS EQUIPPED WITH A FUSE.
Cleaning Instructions 1. Always unplug the fan before cleaning. Always disconnect the cord from the electrical outlet before cleaning your fan. 2. To clean between the grilles that covers the air intake. We recommend using a pipe cleaner, flexible dustwand, vacuum cleaner or compressed air to gently remove the dust.
FCC WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Troubleshooting If your fan fails to operate, please follow these procedures prior to contacting customer service: PROBLEM Fan is not turning on. PROBABLE CAUSE SOLUTION A. Fan is not A. Ensure unit is in the OFF plugged into a position. Plug in unit 120V AC, 60Hz and attempt to turn on polarized outlet/ again. receptacle. B. Please check your B. Breaker/fuse has electrical box to been tripped. has not been “tripped”. C. Fuse inside plug Ensure unit is in OFF of fan is blown. position.
WARRANTY INFORMATION Your Ozeri Fan is warranted to the original owner for 1 year from the date of purchase against defects in material and workmanship under normal use and service. Should your Ozeri Fan prove defective within 1 year from the date of purchase, return the defective product, freight prepaid along with an explanation of the claim to “Ozeri.” Please pack your Ozeri Fan carefully to avoid damages in transit.
