Installation Instructions, 56637 Post to Beam shown assembled with OWT Timber Bolts (sold separately) OWT Timber Bolts come in 4 adjustable length to suit your application Installation Instructions, 56637 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
127 5.00 127 5.00 53 2.07 47.82 44.64 1.88 1.76 [314] 12.35 313.63 12.35 kit contains 2 identical assemblies 56637 Installation Instructions, 56637 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
Suggested Tools (others may be required) Installation Instructions, 56637 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
Two 2x8 Beams One 2x8 Beam One 4x8 Beam (requires dato cut to post) installation options Installation Instructions, 56637 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
6623 option (sold separately) drill out dimple per 56623 installation instructions note: drill hole BEFORE step 1 optional accessory Installation Instructions, 56637 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
adjust to cut depth 1/4" multiple cuts 1/4"~ apart dim A remove pieces beam width pencil A C B dim A ledge 1.75 D cut depth dim A-ledge= 4x8 only Installation Instructions, 56637 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
(HCN) provided Tool Required 3/8" Driver (OWT Timber Screw) provided safe zone for optional temporary hardware = = optional screw or nail temporary hardware beam width pencil step 1 Installation Instructions, 56637 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
temporarily install plate and mark center of holes; repeat if 2 beams are installed 1 beam installation 2 beam installation Prevent Unsightly Breakouts drill most of the way from one side DO NOT breakout then repeat from opposite side step 2 Installation Instructions, 56637 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
OWT Timber Bolt (sold separately) same process for all (HCN) provided Tool Required 3/8" Driver (OWT Timber Screw) provided step 3 Installation Instructions, 56637 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
