Installation Instructions, 56636 Post to Beam shown assembled with OWT Timber Bolts (sold separately) OWT Timber Bolts come in 4 adjustable length to suit your application Installation Instructions, 56636 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
127 5.00 127 5.00 [314] 12.35 313.63 12.35 kit contains 2 assemblies note hole spacing difference on upper plate 52.58 2.07 56636 Installation Instructions, 56636 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
Suggested Tools (others may be required) Installation Instructions, 56636 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
drill out dimple per 56623 installation instructions note: drill hole BEFORE step 1 56623 option (sold separately) optional accessory Installation Instructions, 56636 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
(HCN) provided Tool Required 3/8" Driver safe zone for optional temporary hardware = (OWT Timber Screw) provided = optional screw or nail temporary hardware beam width repeat on side pencil step 1 Installation Instructions, 56636 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
temporarily install plates and mark center of holes Prevent Unsightly Breakouts drill most of the way from one side DO NOT breakout then repeat from opposite side step 2 Installation Instructions, 56636 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
(HCN) provided Tool Required 3/8" Driver OWT Timber Bolt (sold separately) (OWT Timber Screw) provided step 3 Installation Instructions, 56636 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
polyurethane between boards Additional Construction Technique Installation Instructions, 56636 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
optional 2" Timber Bolt Heavy Duty Washer (OWTTBW-2)#56680 Additional Construction Technique Installation Instructions, 56636 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
2 4 9 1 3 6 ITEM QTY. PART NO. NUMBER 6x6 1 1 Cedar Post 2x8 2 1 Cedar Board 2x8 3 1 Cedar Board 2x8 4 2 Cedar Board 5 1 56608 6 2 56650-10 0.25 56680 7 1 56636 9 0.48 56627 8 7 5 DESCRIPTION 6x6x24.00 2x8x12.00 2x8x24.00 2x8x24.00 6x6 Post Base OWT Timber Bolt 6-8" 2" Timber Bolt Heavy Duty Washer (OWT-TBW-2) Assembly, Post to Beam Bolt Offset OWT Timber Screw 3-3/4" Additional Construction Technique Installation Instructions, 56636 V1.
