User Manual

This Shade Wall is made with flame resistant fabric which meets CPAI-84 specifications. IT IS NOT FIREPROOF. The fabric will burn if left in continuous
contact with any flame source. The application of any foreign substance to the Shade Wall may render the flame-resistant properties ineffective.
WARNING
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS SHADE WALL FABRIC
Step 1: Set up your 10 x 10 canopy by following the directions that
came with it.
Step 2: Unfold the shade wall and let the fabric hang vertically as shown.
Step 3: Attach the s-hooks at the upper corners of the shade wall to
the upper corners of the canopy frame.
Step 4: At the bottom corners of the shade wall attach the s-hooks
into the holes in the bottom of the canopy leg poles.
Step 5: Wrap the remaining hooks around the vertical canopy leg
poles and secure to the ring on the shade wall.
Step 6: Fasten the ties at the top of the shade wall to the canopy frame.
ASSEMBLY INSTRUCTIONS
Model W951.1TX – Texas Flag Shade Wall with Organizer Pockets
If you have product questions, Please call 1-800-325-4121 or send an email to [e-mail]