User Manual

Projector Screen Front View
Projector Screen Rear View
Projector Screen Folded View
for use inside the tent
ASSEMBLY INSTRUCTIONS
MODEL W2039 Ozark Trail Portable Projector Screen
To Attach the Screen to a 10 x 10 Canopy :
Step 1: Set up your 10 x 10 canopy by following the directions
that came with it.
Step 2: Unfold the projector screen and let the fabric hang as shown.
Step 3: Attach the s-hooks at the upper corners of the projector
screen to the upper corners of the canopy frame. Use the sliders
to adjust the
string length if the screen needs straightening.
Step 4: Attach the s-hooks at the lower corners of the projector
screen
to the holes in the bottom of the canopy leg poles. Use the
sliders to adjust the
string length if the screen needs straightening.
The Screen can be folded for use inside a tent:
Step 1: Set up your tent by following the directions that came with it.
Step 2: Fold the projector screen in half so it can be hung vertically.
Step 3: Attach the s-hooks at the center of the screen at the fold
to fabric loops inside your tent.
Note: The adjustable corner hooks can be used to hang the
projector screen almost anywhere. The adjustable corner strings can
be untied and moved depending on the set up. They can be used
to extend the length of the top corner connectors if necessary.
If you have product questions, Please call 1-800-325-4121 or send an email to [e-mail]
This Portable Projector Screen is made with flame resistant fabric which meets CPAI-84 specifications. IT IS NOT FIREPROOF.
The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the Portable
Projector Screen may render the flame-resistant properties ineffective.
WARNING
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS PORTABLE PROJECTOR SCREEN FABRIC