Installation Guide

Stand a-frame right hand (3) up making sure that axel support tabs (1) are facing towards the outside of the
frame. Posion top a-frame brace with handle (7), insert two long bolts (10) and hand ghten a nut (12) on
each. Repeat step for le side of a-frame.
Slide axel (13) through axel support tabs (1) so that an even amount protrudes out both sides. Slide two large
washers (11) on the axel unl they hit the axel support tabs (1). Then slide on one wheel (2) and one large
washer (11). Next insert one coer pin (9) through the hole in the end of the axel (13). Bend the coer pin (9)
so that it cannot slide out of the hole. Repeat step for other wheel (2).
Posion boom a-frame brace (8) so that the holes line up with a-frame right hand (3) and a-frame le hand
(4), insert two long bolts (10) and hand ghten a nut (12) on each. Repeat step for le side of a-frame boom
brace. Tighten ALL bolts rmly.
Assembly Instrucons (Puller Frame)
3. 4.
1.
13.
3.
1.
3.
13.
1.
11.
11.
13.
2.
13.
9.
2.
9.
2.
13.
13.
2.
3.
11.
13.
11.
13.
2.
3. 4.
13.
8.
3. 4.
7.
10.
12.
10.
12.