Instructions / Assembly

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
Post securing options
#10 x 1-1/4" panhead screw mounting holes •
(screws not included)
Polyurethane adhesive; 3-4 squeezes on •
chauk gun applicator inside "injection hole"
Both methods above•
polyurethane adhesive injection hole
Typical
5
Installation Instructions, Wood Post Anchors
notes:
post anchor may be driven into any desired depth.•
recommend using polyurethane adhesive on •
applications where securing holes are below
surface level to prevent post rot.
30160 shown