OPERATOR’S MANUAL STAINLESS STEEL BEAM CLAMP 1 TON 2 TON These Beam Clamps meet or exceed the following standards: CE AS4991 ANSI B30.10 (For use with manual or powered hoists) pg.1 P.O. Box 845, Winona, MN 55987 Phone (800) 749-1064 (507) 474-6250 Tech Support (507) 457-3346 Fax (507) 452-5217 sales@ozliftingproducts.com www.ozliftingproducts.
Table of Contents Pg.2 . . . . . . . . . . . . . . . . . . . . Product Features Pg.3 . . . . . . . . . . . . . . . . . . . . Warranty Pg.4 . . . . . . . . . . . . . . . . . . . . Important Information and Precautions Pg.5 . . . . . . . . . . . . . . . . . . . . Warnings Pg.6 . . . . . . . . . . . . . . . . . . . . Technical Information/ Pre-Installation Pg.7 . . . . . . . . . . . . . . . . . . . .
One year warranty OZ Lifting Products LLC® guarantees this product to be free of defects in materials and workmanship for one year from the date of shipment. This warranty does not apply to products that show signs of misuse, overloading, alteration, improper maintenance or negligence. The normal wear and tear of moving parts is excluded from the warranty. Moving parts are defined as brake discs, wire rope and other wear components that are subject to use conditions.
Important Information and Precautions This manual contains general instructions dealing with the normal installation, operation and maintenance of the products described herein. This product should not be installed, operated, or maintained by any person who has not read all the contents of these instructions. Failure to read and comply with these instructions, warnings, or limitations noted might result in bodily injury, death, or property damage.
Warnings Failure to read and comply with the following warnings may result in a hazardous situation that could lead to death, serious injury, or property damage. Be sure to properly install, operate, and maintain the Beam Clamp so that it does not come off the beam. Do Not lift more than the designated clamping range. Do Not lift people or lift loads over people. Do Not operate a damaged or malfunctioning product. Do Not remove, deface, or obscure warning labels.
Technical Information (1, 2 tons) Specification OZ1BC Safe Working Load (lbs) Dimensions (in) OZ2BC 2,000 4,000 A 2.95-9.05 2.95-9.05 B 14.96 max. 14.96 max. C 2.51 2.91 D .90 .90 E 9.13 9.13 F 3.54-5.90 3.54-5.90 G 1.02 1.02 H .75 .87 9 11 Net Weight (lbs) *Dimensions are for reference only and subject to change without notice. Pre-Installation Check for damage during shipment. Do not install or use a damaged product.
Operation Warnings & Precautions Beam Clamp operators should read and fully comprehend this entire manual and all warnings on the hoist before beginning hoist operation. If this manual is not read and followed completely injuries may occur. Operator Requirements: Must be trained in proper trolley operation and dealing with potential malfunctions. Should not operate beam clamp while under influence of alcohol, medications, or drugs. Should not operate the beam clamp while tired or distracted.
P.O. Box 845, Winona, MN 55987 Phone (800) 749-1064 (507) 474-6250 Tech Support (507) 457-3346 Fax (507) 452-5217 sales@ozliftingproducts.com www.ozliftingproducts.com Rev.
