Product Manual

EN pg.3
DIMENSIONS AND SPECIFICATIONS:
MODEL SPECIFICATION
Model OZ1000EC OZ2000EC OZ4000EC
Lifting Top Layer 1000 lbs. 2000 lbs. 4000 lbs.
Load Chain Falls 1 1 2
Chain 6.3mmX6m 7.1mm x 3m 7.1mm x 3m
Lifting Speed 20 FPM 13 FPM 6.5 FPM
Motor 1.8HP 2.4HP 2.4HP
Motor KW 110V 1400W/10A 1800/13A 1800/13A
Duty Cycle 18 min. 18 min. 18 min.
Pendant Length 19’ 19’ 19’
Power Cord Length 15’ 15’ 15’
Net Weight 53 lbs. 64 lbs. 84 lbs.
SAFETY PRECAUTIONS:
Throughout the manual are safety precautions and instructions for awareness, along with information
on potential hazards. Due to the complexities of this hoist and the environment in which it operates,
situations may arise which are not directly discussed in detail in this manual.
This manual is provided as a guide to personnel involved with the operation and maintenance of the
hoist equipment. Only trained and qualied personnel can operate and maintain this equipment. We
recommend that all personnel who operate and maintain the hoist review and become familiar with
this manual. In addition, we recommend that this manual be kept readily available for reference before
beginning operation, maintenance and testing of this equipment.
Most accidents involving hoist are the result of violating safety rules during operation and/or lack of
inspection and maintenance procedures.
PRODUCT WARNINGS:
Warning indicates an imminently hazardous situation which, if not avoided,
could result in death or serious injury, and property damage.
DON’Ts
DON’T operate the hoist until you have read the Operating, Maintenance and parts manual.
DON’T use the hoist to lift, support or transport people.
DON’T lift loads over personnel.
DON’T operate the hoist until all personnel are clear of the supported load.
DON’T operate a hoist which has been modied without the manufacturer’s approval or without
certication that it is in conformity with ANSIIASME B30 volumes.
DON’T operate a hoist unless the load slings or other approved single attachments are properly sized
and seated in the hook saddle.
DON’T use load chain as a sling or wrap the chain around the load.
DON’T use hoist with twisted, kinked, damaged or worn load chain.
DON’T operate a hoist on which the safety place cards or decals are missing or illegible.
DON’T operate a damaged or malfunctioning hoist.
DON’T remove or obscure the warning labels on the hoist.
WARNING