Product Manual

EN pg.5
Warnings
Failure to read and comply with the following warnings may result in a hazardous situation that
could lead to death, serious injury, or property damage. Be sure to properly install, operate, and
maintain the OBH-CLAMP so that it does not come off the beam.
Do Not lift more than the designated load range.
Do Not lift people or lift loads over people.
Do Not operate a damaged or malfunctioning product.
Do Not remove, deface, or cover warning labels.
Do Not operate until personnel are warned and cleared from the area.
Do Not use if load is not suspended vertically.
Do Not unthread rod past end of clamp to prevent dislodging swivel pad.
Do Not use clamp missing swivel pad.
Do Not use the OBH-CLAMP without locking rmly in place.
Do Not use the OBH-CLAMP as welding ground.
Do Not use the OBH-CLAMP for a buffer or grab.
Do Not add lengthening pieces to the OBH-CLAMP lever.
Do Not weld on the lifted load.
Do Not open the OBH-CLAMP when it is holding a load.
Do Not use the OBH-CLAMP in corrosive environments.
Do Not use connections between the OBH-CLAMP and load.
Do Not allow the load to swing.