Operation Manual

25
The Oyster Digital Functions
You reach the “Oyster Digital” menu by pressing the MENU button and then selecting
the point “Oyster Digital” with P+/P-. The Oyster Digital menu is opened by pressing
OK.
You can select the individual points as normal with P+/P- and OK. All the search
functions and the necessary associated settings will be carried out through the Oyster
Digital menu. Many functions will also be carried out fully automatically, if this increases
the ease of operation for you.
Therefore directly after the switch-on of the equipment the antenna is automatically
opened and moved to the last receiving position. If no picture can be received, then
there is an automatic start of the fully automatic search.
On the switching off of the equipment with the red standby button or the buttons on
the indication unit the antenna automatically closes, as well as the antenna retracting if
you switch on the ignition of your vehicle in order to start the motor. Naturally the
retraction of the antenna lasts a few seconds. Never travel until the antenna is fully
retracted.
Before moving off generally check with a look at the vehicle roof for the correct
storage position of the antenna. The indication unit should only display a green
standby point or be fully dark.
A further fully automatic comfort function of your Oyster Digital is the automatic
realignment of the antenna to another (at the time) selected satellite, if you switch to a
programme which is transmitted from another satellite. Therefore all the receivable
satellites are available for you at any time. The only thing you have to do is change the
programme.