Operation Manual

Search procedure

The automatic search procedure of the receiver searches for any satellite in accordance

with a new programme. Programmes which are already entered in the transmitter list will

automatically update the changes. Coded transmitters will operate according to

guidelines.

To carry out a search procedure

1. Call up the search procedure through the main menu in sub point “Transmitter list/

Transmitter search”.

2. Select from the satellite list that you wish to search for and confirm with OK.

3. Wait until the end of the search procedure. The displayed information is the

technical detail of the searched for transmitter. The “Total” field gives

information on the free programme that has been found.

4. When the search procedure has ended, the channel selection window will be

inserted.

Channel selection window

This window contains the transmitter list on the left and on the right the new channels.

In order to change between the TV and radio transmitters that have been found, please

press the TV or Radio button. To change between the lists use the SWAP button. The

various functions are available for you. In order to call these up, move the selection first

to the channel which you want to change, then press OK and select in the presented

menu the required option.

With operations in which there is an insertion of the transmitter entry, change the

selection in the left window and you will be required, to select the target entry from the

list with OK.

For the found transmitters that you have found (right list) the following options are

available:

Activate View channel

Copy before Copies the selected new transmitter into the transmitter list before an

existing entry. This entry and the following one will be pushed

downwards to make space for the new one.

Copy on Copies the selected new transmitter in the transmitter list on an

existing entry. The old entry is therefore written over.

Look at the existing transmitter list in the left column. You can switch the preparation of

this list with the SWAP button. Available here for you are the following menu options:

Activate View channel

Return With the transmitters, which have been found again by the search

procedure, you can use of this option to prevent their updating. Re-

found transmitters will be shown in the transmitter list in green.

Cut out Deletes a transmitter from the transmitter list. The following