Operation Manual

Edit settings Æ OSD / EPG

Status insert duration:

Establishes how long the status display with information on the

current programme stays on the screen following a programme change.

Channel number – Timeout:

Establishes for how many seconds a programme

changeover will be the accepted through a number input, if this is incomplete.

OSD Transparency:

Set the transparency of the OSD inserts, as well as the strength of

the picture so that it should appear through the OSD.

Help text:

Here the inserting of the Help text can be completely switched off.

Shortened Help with OK:

If this topic is activated, a short HELP page is inserted with

the pressing of the OK button. Otherwise the status panel will display the programme

information (Default).

Edit settings Æ Satellite system

With this topic you will acquire a list of all the satellites known at the time being in the

area this equipment has been made for.

As an advanced feature you are able to mark one or several of the satellites as being

“inactive”, so no channels transmitted on the inactive satellites will show in the channel

list.

It is highly recommended not to alter the settings given here without the detailed

advice of your dealer. Misuse of these settings can result in virtually

malfunctioning equipment. Efforts needed to restore false settings are not part of

the warranty.

Once a new satellite appears in space, this list will be updated and made available through

your dealer, who will be happy to install an upgrade to your equipment if necessary.

Edit settings Æ Reproduction

Television

: Select 4:3 unless you’ve got a wide screen 16:9 TV set.

Video format TV / VCR / VCR-In:

With RCA connections it is recommended to set

all topics to “CVBS”. For TV-out you may select “RGB” as well..

Volume – Bypass:

Defaults to “None” and should not be modified.

Edit settings Æ Save settings

Activate this topic to make any changes to the setup permanent.

If unsure just switch to standby to discard any changes made.