Operation Manual

Configuration of the receiver

Basic settings

The basic settings of the receiver will be taken from the submenu “Edit settings” in the

main menu. Arrive there by pressing the MENU button twice.

Use the +/- buttons in order to change the individual options in the sub points of the

“Edit settings” menu.

Providing the particular option provides for selection from a value list, this list can be

displayed with the OK button. With numerical values, directed inputting is possible with

the number buttons.

Please also note for the individual points the help insertion on the screen.

Settings which have changed since the last storage will be given in green colour.

Once you have made the changes, you must store them. Go to the “Edit settings” menu

on the point “Save settings” and then press OK. Wait until the menu disappears - only

then the storage procedure has been completed. This can, according to circumstances,

last for several seconds.

Edit settings Æ General

Time zone

: Here set your time zone in relation to the world time (Greenwich Time,

UTC). This is necessary, because the time transmitted by the transponder operations

always relates to UTC, according to the world wide DVB-S standard.

Operating language:

Here you can set your preferred language. All OSD inserts then

show up in this language. A change is only activated through the menus. The EPG text

will naturally be generally displayed in the language, in which the provider has transmitted

it.

Search for scrambled (encrypted) channels:

Here you can select whether the

automatic search procedure should be carried out for an encrypted channel and this one

should be displayed in the list. A reproduction of picture and sound from an encrypted

channel is only possible with the correct CA module inserted into a CI slot of the

decoder and a valid smart card applied to the CAM.