Operation Manual

10
The remote control
: Press to MUTE the
audio. Press and hold for
approx. 3sec. To activate
the SLEEP feature (Switch
to Standby, but keep the
antenna open)
TV: Activates the TV
mode. If no signal is
received, the antenna will
move to the last known
position with a good signal
(if memorized).
AV: Switches to VCR
operation. (VCR SCART is
feed to the TV SCART), as
well SAT IN is fed to SAT
OUT
OK: Press to confirm any
dialogue on screen or to
activate the programme
information display.
VOL-: Reduces the volume.
Also used to navigate in
menus (e.g. decrease
values).
i/EPG: Shows the full
programme information
(EPG) if applicable.
Green: Freezes the picture.
Press again to release.
Blue: Equal to SWAP.
Red: No function.
Yellow: No function.
: Power ON/OFF the
Oyster. Retracts or opens
the antenna.
RADIO: Activates the
RADIO mode to listen.
LIST: Shows the full
programme (channel) list
on screen.
0..9: Number digits to
select any channel (Type
in 4 digits or alter-natively
less and wait 2 sec. until
accepted)
SWAP: Swaps back to
the previously seen
channel.
EXIT: To leave any On
Screen Menu Settings.
VOL+: Increases the
volume. Also used to
navigate in menus (e.g.
increase values).
P+: Channel plus.
Also navigates upwards
in menus.
P-: Channel minus.
Also navigates down-
wards in menus.
MENU: To open the On
Screen Display menu.