Operation Manual

56
RS232 interface
The serial RS232 interface is used to connect the receiver to a computer.
On our website at www.ten-haaft.de
you will find programs to support
this functionality. You can download updates of the operating software
and up-to-date channel lists that may resolve technical problems or
provide new functions or channels.
Never use any other software updates than those provided on our
website at www.ten-haaft.de. The usage of any third-party
software update or software not released for your system variant
may cause damage to your satellite system and may render your
warranty invalid.
The connection of the receiver to a PC requires a serial cable with a 1:1
pin allocation, i. e. hard-wired pins. The PC-side of the cable must have a
9 or 25-pin D-SUB connector, depending on the serial port of your PC.
The receiver-side of the cable requires a 9-pin D-SUB connector.
Extension cables for mice are configured accordingly and can hence be
used.
The pins of the receiver port are assigned as follows:
1, 4, 6 – 9
not assigned
2 TXD
3 RXD
5 GND