Operation Manual

31
Editing transponders/channels
The program menu (press MENU once) contains the two sub-menus
"Edit Transponder" and "Edit Channel". These two sub-menus allow
you to view and edit the settings required for the reception of the
individual channels. Wrong entries at the individual positions may
prevent the reception of one or more channels.
The automatic search function (see section "Search" on page 38) usually
provides the correct settings automatically. Under certain conditions, you
may input settings received e.g. from your broadcasting station to enable
the reception of specific programs.
When the decoding function of the digital CI receiver is used, encrypted
programs can only be decoded if the correct data is entered in the menu
"Edit Transponder" under "Network ID" and "T.Stream ID". These
settings must be checked and adjusted, if required, when the satellite's
channel allocation is changed by the operators.
If an encrypted channel for which you have a valid smartcard cannot be
decoded, select "Edit Transponder" and highlight "Network ID". Press
LIST. Changed settings are now automatically corrected. In this case, the
entry will change to green. Press EXIT and confirm the confirmation
prompt with OK. Your channel list is now up to date and the encrypted
program can be received.