Operation Manual

9
Connection of the system
The following connections must be made at the receiver before initial
operation:
TV
(Scart)
Using a SCART cable, connect the TV port of the
receiver to your television set.
SAT IN
Connect the provided white coaxial antenna cable from
the antenna unit to this port.
DVB-T IN
If the "+T" option is included, connect here the cable
from your terrestrial antenna (not included).
12-24V
Connect the power supply cable from the vehicle
battery to this port.
ANTENNA
CONTROL
Connect the control cable from the antenna unit to this
port.
SAT
MOUSE
Plug in here the satellite mouse.
Your digital CI receiver has various other connections for optional
features:
TV OUT
(antenna)
Antenna signal output for TV sets.
(Default setting: UHF channel 32, audio standard B/G)
CVBS
Composite video output (FBAS). This port can be used
e.g. with a 3-way Cinch cable together with the audio
output AUDIO R/L.
AUDIO
R/L
For the connection of e.g. your car stereo system or
active speakers. At this port a TV set or flat-panel
display can be connected in conjunction with the CVBS
output.