Instruction Manual


16
CONNECTING THE RAID SYSTEM TO A
COMPUTER
To connect the RAID System, please complete the following steps:
1. Connect the AC/DC Power Adapter.
eSATA
DC IN
2. Insert both ends of the USB 2.0, eSATA, FireWire 400, or FireWire 800
cable(s) into the corresponding port of the RAID System and the host.
eSATA
DC IN
The RAID System should only be connected to a host computer via one
interface. Connection of the RAID System to a computer via two or more
interfaces simultaneously is highly not recommended, especially for data
transfers.