Installation Guide

CareSpa
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your
existing shower
head. To remove,
turn the existing
shower head in a
counterclockwise
direction.
STEP 4
In a clockwise
direction, screw
grooved end of
hose to the taped
portion of the
shower arm. Hand
tighten only.
STEP 2
Remove any
remnants of old
plumber’s tape and
flush out shower
pipe for 5 to 10
seconds.
STEP 5
Attach other end
of hose to base of
handheld and hand
tighten.
STEP 3
Wrap plumber’s
tape clockwise 3
or 4 turns around
threaded end of
shower arm.
STEP 6
Attach double
stick tape provided
to back of holder
and press firmly to
clean, dry shower
wall. Place your new
handheld shower
head into holder.
For use with automatic
compensating valves
rated at 1.50 GPM
(5.68 L/min) or less.
EASY TWIST
SPRAY
SELECTION
Enjoying multiple
spray patterns during
your shower has never
been easier. With the
Fury’s easy twist design,
simply rotate the easy
spray selector for a quick
spray change.
USING THE
COMFORT
CONTROL
Located on the
back of the shower
head, the comfort control lever eliminates
sudden blasts of water. Note: The comfort
control is not a shut off valve. When turned to
the lowest position, the shower head continues
to flow. This is a normal safety feature. Unit
may be in lowest flow position during shipping.
Check the position of comfort control upon
installation.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
or 1.775.420.5600
Support is also available via email at
[e-mail]
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST