Installation Instructions

STEP 16
Attach end of 30" hose to top threaded
end of diverter and attach other end of
hose to threaded connection of RainBar.
Hand tighten only.
STEP 17
In a clockwise direction, screw end of 72"
hose to lower threaded end of diverter.
Hand tighten only.
STEP 18
Thoroughly clean area where wall mount
will be applied.
STEP 19
Remove covering from one side of
adhesive strips supplied with wall mount
installation kit.
STEP 20
Apply adhesive strips to back of
wall mount.
STEP 21
Remove covering from adhesive strips
applied to back of wall mount.
STEP 22
Press wall mount firmly to cleaned area on
shower wall for 30 seconds. Remove back
covering from dome sticker and insert
dome sticker into hole on front of wall
mount.
STEP 23
Attach end of 72" hose to base of
handheld and hand tighten.
STEP 24
Insert your new handheld shower in holder.
Enjoy!
INSTALLATION: DRYWALL / TILE WITH STUD
RAINBAR + BURST COMBO