Installation Guide

DRENCH
STEP 1
Remove your
existing shower
head. To remove,
turn the existing
shower head in a
counterclockwise
direction.
STEP 2
Remove any
remnants of old
plumber’s tape
and flush out
shower pipe for
5 to 10 seconds.
STEP 3
Wrap plumber’s
tape clockwise
3 or 4 turns
around threaded
end of shower
arm.
STEP 4
Screw the
diverter clockwise
onto the taped
portion of the
shower arm.
Wrap plumber’s
tape 3 turns
around threaded
ends of the
diverter.
STEP 5
In a clockwise
direction, screw
rain unit onto the
taped portion of
the diverter and
hand tighten.
STEP 6
Attach end of
hose to diverter
and hand tighten.
Attach other
end of hose to
handheld shower
and tighten. Place
handheld unit into
holder on right
side of the diverter.
EASY TWIST SPRAY
SELECTION
Enjoying multiple spray
patterns during your
shower has never been
easier. With the Drench’s
easy twist design, simply
rotate the easy spray
selector for a quick spray
change.
USING THE DIVERTER
To change the shower spray: Place your index
finger on one lever and your thumb on the
other lever and rotate either clockwise or
counter clockwise (depending on the current
position) until you feel it click into place.
EASY INSTALLATION
INSTRUCTIONS
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.
ATTENTION:
WASHERS PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted into both hose ends for proper installation.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement parts
or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
or
775-420-5600
LIVE CHAT:
www.oxygenics.com
EMAIL:
[e-mail]
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30pm PST*
*Closed on all nationally observed holidays