Installation Guide

EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your
existing shower
head. To remove,
turn the existing
shower head in a
counterclockwise
direction.
STEP 2
Remove any
remnants of old
plumber’s tape
and flush out
shower pipe for
5 to 10 seconds.
STEP 3
Wrap plumber’s
tape clockwise
3 or 4 turns
around threaded
end of shower
arm.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
or 1.775.420.5600
Support is also available via email at
[e-mail]
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST
EASY TWIST SPRAY
SELECTION
Enjoying multiple spray
patterns during your
shower has never
been easier. With the
PowerMax’s easy twist
design, simply rotate the
easy spray selector for a
quick spray change.
USING THE COMFORT CONTROL
Located on the back of the shower head, the comfort control
regulator eliminates sudden blasts of water. Note: The comfort control
is not a shut off valve. When turned to the lowest position, the shower
head continues to flow. This is a normal safety feature. Unit may be in
lowest flow position during shipping. Check the position of comfort control upon installation.
PowerMax
USING THE DIVERTER
To change the shower spray: Place your
index finger on one lever and your thumb on
the other lever and rotate either clockwise
or counter clockwise
(depending on the
current position)
until you feel it click
into place.
STEP 4
Screw the diverter
clockwise onto
the taped portion
of the shower
arm. Wrap
plumber’s tape
3 turns around
threaded ends of
the diverter.
STEP 5
In a clockwise
direction, screw
fixed unit onto
the taped portion
of the diverter
and hand
tighten.
STEP 6
Attach hex nut end of
hose to diverter and
hand tighten. Attach
conical nut end of
hose to handheld
shower and tighten.
Place handheld unit
into holder on right
side of the diverter.