Installation Guide
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 4
In a clockwise direction,
screw handheld holder
onto the taped portion
of shower arm. Hand
tighten only.
STEP 2
Remove any remnants
of old plumber’s tape
and flush out shower
pipe for 5 to 10
seconds.
STEP 5
Attach end of hose to
handheld holder and
hand tighten.
STEP 3
Wrap plumber’s tape
clockwise 3 or 4 turns
around threaded end
of shower arm.
STEP 6
Attach end of hose to
base of handheld and
hand tighten. Insert
your new handheld
shower in holder.
MARVEL
EASY INSTALLATION
INSTRUCTIONS
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
or
775-420-5600
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.
ATTENTION:
WASHERS
PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted
into both hose ends for
proper installation.
EASY TWIST SPRAY
SELECTION
Enjoying multiple
spray patterns during
your shower has never
been easier. With the
Marvel’s easy twist
design, simply rotate
the face for a quick
spray change.
r