Installation Instructions

Amp
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your
existing shower
head. To remove,
turn the existing
shower head in a
counterclockwise
direction.
STEP 2
Remove any
remnants of old
plumber’s tape
and flush out
shower pipe for
5 to 10 seconds.
STEP 3
Wrap plumber’s
tape clockwise
3 or 4 turns
around threaded
end of shower
arm.
STEP 4
In a clockwise
direction, screw
handheld holder
onto the taped
portion of shower
arm. Hand
tighten only.
EASY TWIST
SPRAY SELECTION
Enjoying multiple spray patterns
during your shower has never
been easier. With the Amp’s
easy twist design, simply rotate
the easy spray selector for a quick
spray change.
ATTENTION:
WASHERS PRE-INSTALLED IN HOSE ENDS
Washers must be inserted into both hose ends for proper installation.
STEP 5
Attach hex nut
end of hose to
holder and hand
tighten.
STEP 6
Attach conical
nut end of hose to
handheld shower
and tighten. Insert
your new handheld
shower in holder.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
or 1.775.420.5600
Support is also available via email at
[e-mail]
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.