SDS

Safety Data Sheet
product. The personnel should wear normal protective equipment and positive self-contained breathing apparatus. Move unaffected
product to a safe area if safe to do so.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS
Observe the protection measures given in sections 5 and 8. Avoid materials and products which are incompatible with the product
(see section 10)
Avoid direct contact of the product with moisture, except for emergencies and clean-up as described in this MSDS
ENVIRONMENTAL PRECAUTIONS
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP
Sweep up and shovel. Contain spillage, and then collect with an electrically protected vacuum cleaner or by wetbrushing and place in
container for disposal according to local regulations (see section 13). Keep in suitable, closed containers for disposal.
7. HANDLING AND STORAGE
PRECAUTIONS FOR SAFE HANDLING
Avoid contact with skin and eyes. Keep away from sources of ignition. Clean and drip process piping and equipment before using the
product. Never return unused product to original container. Keep away from incompatible products
Containers and equipment used to handle the product should be used exclusively for that product. Avoid any contact with moisture or
humidity, except for emergencies and clean-up as described in this MSDS
CONDITIONS FOR SAFE STORAGE
Store in vented containers in a cool, dry and well-ventilated place. Keep away from heat and humidity sources. Keep away from
reactive products
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY PROTECTION
Specific respirator should be selected based on contamination levels found in the work place and jointly approved
by the national Institute of Occupational Safety and Health (NIOSH) and the Mine Safety and Health Administration
(MSHA)
HAND PROTECTION
Appropriate impervious and chemical resistant gloves
EYE PROTECTION
Splash-proof or dust-proof safety goggles and face shield
SKIN AND BODY PROTECTION
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
COMPONENTS WITH WORKPLACE CONTROL PARAMETERS
Sodium percarbonate
15630-89-4
NA
NA
NA
Contains no substances with occupational
exposure limit values.
Acetamide, N,N`-1,2-
ethanediylbis[N-acetyl-
10543-57-4
NA
NA
NA
Contains no substances with occupational
exposure limit values.
Sodium carbonate,
monohydrate
5968-11-6
NA
NA
NA
Contains no substances with occupational
exposure limit values
Component
CAS
Number
Value
Control
Parameters
Basis
Remarks
Revision Date: 3/20/2014
Version: 11-0000004-1
3