Oxy 3 2018 Tareq Edition Manual

Vertical Fin Assembly
(box1/bag 1)
3x10x4 Radial Bearing
OXY0402
Vertical Fin
OXY0401
Tail Case
Loctite 243
CA Glue
Tail Case Assembly
(box1/bag 1)
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it ready to us
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it ready to us
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it ready to us
Tail Rotor Assembly
(box1/bag 2)
Important Note:
This part comes pre assembled
WITHOUT thread lock. It MUST be
re-assembled with thread lock as shown.
OXY0710 - OXY4
Tail Grip
MR63-X - 3X6X2
Radial Bearing
OXY0054 - 3X4X0.1 Shim
F3-6M-3x6x2.8 Thrust Bearing
OXY0723 - Tail Grip Spacer
OXY0049-Tail Hub
OXY0054
3X4X0.1 Shim
O-Ring ID2 W1
OXY0055
2X3.5X0.5 Washer
TCEM2X5 - M2X5
Hex Cap Screw
OXY0050 - linkage
ball 4 X 3 M2
3x10x4-Flange Bearing
add silicon grease
Chapter 6: Tail Assembly
page 7