Oxy 3 2018 Tareq Edition Manual

M2 Self
Lock Nut
Battery Straps
( Accessories Bag )
6 x M2x6 Self
Tapping Screw
don't over tighten
Landing Gear Skid
Satellite
EX
Main Blades Installation
OXY0077-M2X14
Shoulder Button Screw
Main Blades
Main Blade Lock Note:
In small Heli or in aggressive head design
like oxy 2, 3 and 4 if you fly on hard terrain
MUST set loose.This suggestion will avoid
annoying wobbling on ramp up or landing.
Tail blade need be loose. Set it free to rotate.
About lock thread, to assure the Screw M2x 10
use it but carefully. Apply small amount of lock
thread NOT in the Screw but in the Tail Grip Thread,
using a tooth pick. Be careful about lock thread
contamination on plastic tail blade, lock thread
contains chemical that effect plastics, reducing strength.
After assembly clean carefully any lock thread
excess to avoid contamination effect.
Tail Blade
( Box 3 / Bag 20 )
OXY0078 - M2x10
Button Screw
47mm Tail Blade
Landing Gear & Battery Installtion
Tail Blades Installation
page 32
Chapter 17: Landing Gear & Battery Installtion