Oxy 3 2018 Tareq Edition Manual

Be carefully Motor wire
and ESC will not touch
Motor/Pinion.
Use 3 x cable ties, to secure the Throttle ESC wire to the main frame. Use the Frame
built-in socket for best holding. In this Step connect the Motor and ESC Wires but don't
secure yet. Wait till the final motor rotation check, once the FBL system is set up.
NOTE: To reverse Motor rotation direction , just switch 2 of the 3 wires.
Motor wires
2 x Cable Tie
Battery wires
Double - side Tape
( Accessories Bag )
ESC
use your choice of
connector rated
Chapter 13: ESC Installation
page 28