Oxy 3 2018 Tareq Edition Manual

3.20
3
34.80mm
M2
F3-8G-X
3X8X3.5 Thrust Bearing
Important Note:
This part, for tuning reasons,
comes factory pre assembled
with grease and loctite. It is
ready to use.
2xMR83-ZZ
3X8X2.5 Radial Bearing
OXY0054
3X4X0.1 Shim
Important Note:
This part, for tuning reasons,
comes factory pre assembled
with grease and loctite. It is
ready to use.
add silicon grease
loctite 648
loctite 648
loctite 648
loctite 243
OXY0716 -
PL linkage Ball
OXY0749
AL DFC Rod
OXY0383
AL DFC Arm Spacer
2xMF682ZZ
2x5x2.3 Flange Bearing
OXY0382
Al DFC Arm
Fine Adjust Shims:
In order to give fine adjustment options,
the extra Hardware Bag contains extra
Shims 3x4x0.1. Start assembly
with one (each side)pre installed shim.
If the Main Grips have
sideway play, add shims as required.
Each Grips must have the same number
of shims. If you add one shim on the left
side, you need to also add one shim on
the right side
Important Note:
This part comes pre assembled
WITHOUT thread lock. Follow
the instruction for final assembly.
OXY0081
2.1X5.5X1 Washer
TCEM2x6
M2x6 Hex Cap Screw
OXY0007
Spindle Shaft
OXY0079
Damperner Bushing
OXY0137
3.1x5x0.6 Washer
OXY0054
3X4X0.1 Shim
loctite 243
OXY0110
Damper Rubber
page 24
Chapter 11: Main Rotor Assembly
Head Assembly.
(Box 1/ Bag 17)