Oxy 3 2018 Tareq Edition Manual

7mm
93.8mm
5mm
OXY0076
M2x10 Shoulder Screw
OXY0055
2X3.5X0.5 Washer
Main Gear Asssembly
OXY0904
M2 Custom Nut
In order to check the belt installation, we
recommend to follow two simple steps:
1- Check with light, look inside the boom
from the tail case and check the belt is
only twisted 90 degrees.
2- Rotate the main gear in the flight direction
(as shown) and check the tail hub rotates
in the direction shown. If the Tail Rotor rotates
in the wrong direction, go back to previous
instructions and double check your assembly
page 22
Chapter 9: Transmission Assembly
Head Side Main Gear Side