Oxy 3 2018 Tareq Edition Manual

Tail Boom Assembly
B424MXL Timing Belt
OXY0073
Tail Case Insert
( box1/ bag6 )
TCEM2x5
M2x5 Hex Cap Screw
TBEM2x5
M2x5 Button Screw
Tail Case Assembly
Tail Bell Crank Suppport Assembly
Tensioner Assembly
Tail Shaft Assembly
Vertilcal Fin Assembly
OXY0072
Tail Case Cover
before install any shim
read carefully fine
adjustment shims note.
Note: all screws in this step
need add loctite during assembly.
Fine Adjust Shims Note :
In order to give fine adjustment options,
in the Extra Hardware Bag you will find
extra shims 4X6X0.1.
Start assembly WITHOUT any
shims. If Tail Shaft has sideways play
more than 0.2mm,
add shims as required, to one side, as shown.
PRO TIPS: For best Tail performances little
side play is recommended.
4xTCEM2x5
M2x5 Hex Cap Screw
loctite 243
loctite 243
loctite 243
TBEM2x5
M2x5 Button Screw
4xM2 C Washer
page 11
Chapter 6: Tail Assembly