Oxy 3 2018 Tareq Edition Manual

Tail Belt Tensioner Assembly
( box1/bag5 )
Tail Belt Crank Support Assembly
( box1/bag5 )
Tail Belt Crank Assembly
( box1/bag5 )
Important note:
This part comes pre assembled
WITHOUT thread lock. It MUST be
re-assembled with thread lock as shown.
Important note:
This part comes pre assembled
WITHOUT thread lock. It MUST be
re-assembled with thread lock as shown.
Important note:
This part comes pre assembled
WITHOUT thread lock. It MUST be
re-assembled with thread lock as shown.
OXY0071
Beaing Bushing
TBEM2x3
M2x3 Button Screw
MR63_ZZC
3X6X2.5 Radial Bearing
MF682ZZ
2x5x2.3 Flange Bearing
page 9
OXY0390
AL Tail Belt Crank
TCEM1.6x5
M1.6x5 Hex Cap Screw
2 x OXY0057
Pin Screw
OXY0092
4mm Linkage Ball
OXY0924
CF Bell Crank Arm
M2 Hex Nut
OXY0058
Tail Bell Crank Support
Chapter 6: Tail Assembly