OXY2 SH Helicopter Manual

Chapter 6: Tail Assembly
Tail Assembly Step 5
90
CCW Rotation.
Step 5-1:
Tail belt is showed straight coming out,
form tail boom. Be careful to
check the belt if not twisted inside the boom.
Use a flashlight to check inside the boom, for better vision.
Rotate the belt 90 degrees CCW as shown.
Step 5-3:
Final Tail Belt Direction Check:
Pull Tail Belt (as shown) and check the tail hub rotates
in the direction shown. If the Tail Rotor rotates
in the wrong direction, go back to the previous
instructions and double check your assembly.
page 13
OXY0450-Front
Boom Insert
(Box 1/Bag 8)
Press in this insert parts into
Tail Boom to help Tail Belt
doesn't twist in the next
installation step
Step 5-2:
Hold carefully Tail Belt as showed and insert
Front Boom Insert.
Pull Tail Belt here