Installation Manual

4 BX-SVN-JAYFLTR101-1A-EN

Installer's Guide

9. Carefully install the field supplied (1) 16” x 20” filter

in the top section and the (1) 20” x 20” filter in the

bottom section. See Figures 3 and 4. Note: if using 2”

filters, remove the filter spacers shown in Figure 1.

NOTE: It is normal for the filter to fit very tightly

against the insulation inside the cabinet.

10. Reinstall the filter access panel that was removed in

step 2.

Figure 4. Front view of the Unit (Filter access panel

removed and lters in place)

TwentyThreeC, LLC

800 Beaty Street,

Davidson, NC 28036

www.oxboxhvac.com

For more information contact

your local dealer (distributor).

Since the manufacturer has a policy of continuous product and product data

improvement, it reserves the right to change the design and specification

without notice.