Installation Manual

2 BX-SVN-JAYFLTR101-1A-EN
Installer's Guide
Safety Section
WARNING
s
!
!
CAUTION
s
!
HAZARDOUS VOLTAGE!
Failure to follow this Warning could result in property
damage, severe personal injury, or death.
Disconnect all electric power, including remote discon-
nects before servicing. Follow proper lockout/tagout
procedures to ensure the power cannot be inadver-
tently energized.
SHARP EDGE HAZARD!
Failure to follow this Caution could result in personal
injury.
Be careful of sharp edges on equipment or any cuts
made on sheet metal while installing or servicing.
Personal injury may result.
General Data
The filter kit is to be field installed inside the packaged
Oxbox unit, and is designed to work with either vertical
or horizontal duct applications. Filters are field provided
and installed. The kit works with either 1” or 2” throw
away filters.
Filters required (not supplied):
• (1) 16” x 20” and (1) 20” x 20” Filter
Kit Contents
Items Quantity
Bottom filter rack 1
Center filter rack 1
Top filter rack 1
Inspection
Check carefully for any shipping damage. This must be
reported to and claims made against the transportation
company immediately. Any missing parts should be
reported to your supplier at once and replaced with
authorized parts only.
Figure 1. Filter Kit Components
Top Filter Rack
Center Filter Rack
Bottom Filter Rack
Filter Spacer. Remove
when 2” lters used
Filter Spacer. Remove
when 2” lters used