User Manual
Table Of Contents
- I.General Safety Requirements
- II.Safety Terms and Signs
- III.PC Configuration Requirements
- IV.Communication Interface Introduction
- V.How to Communicate Device with PC
- VI.Operation Interface of PC Software
- VII.Device Operation
- i.how to set the probe compensation
- ii. how to set the vertical system from PC softwar
- iii. how to set the horizontal system from PC soft
- iv. how to set the trigger system from PC software
- v. how to set channel from PC software
- vi. how to use automatic measurement
- vii. how to set sampling mode
- viii. how to set built-in function generator
- ix. how to use cursor measurement
- x.how to set the display system
- xi.how to change utility setting
- xii.how to use main action button
- xiii.how to use LAN communication interface
- xiv.how to work WiFi with PC software
- VIII.Technical Specifications
- IX. Appendix
５
I. General Safety Requirements
! Before using the device, Lilliput strongly recommend to browse “Safety Warnings” carefully and completely, so as to
avoid any possible body injury, or any damages to the device, or its accessories, or communicated facility. !
Safety Warnings
i. The device only been allowed to work within specified application scenario.
ii. Before communicating the device with PC, please refer to user manual to familiarize the allowed rating
value completely.
iii. Making sure the allowed rating value of all terminals been well-followed, so as to avoid any potential
short circuit or electric shock.
iv. NO direct body touch with any naked conductor of device when working the device. Naked conductor
covers joints, connecting probe tip, communication interface, and others.
v. No further operation is allowed provided any undetermined failure appears when working the device,
better to seek the assistance of qualified technicians.
vi. DO NOT work the device in humid environment.
vii. DO NOT work the device in explosive environment.
viii. Keep the device in good ventilation environment, and always keep the device surface clean and dry.
ix. Better to have qualified technicians to do device maintenance.