User Manual
Table Of Contents
- I.General Safety Requirements
- II.Safety Terms and Signs
- III.PC Configuration Requirements
- IV.Communication Interface Introduction
- V.How to Communicate Device with PC
- VI.Operation Interface of PC Software
- VII.Device Operation
- i.how to set the probe compensation
- ii. how to set the vertical system from PC softwar
- iii. how to set the horizontal system from PC soft
- iv. how to set the trigger system from PC software
- v. how to set channel from PC software
- vi. how to use automatic measurement
- vii. how to set sampling mode
- viii. how to set built-in function generator
- ix. how to use cursor measurement
- x.how to set the display system
- xi.how to change utility setting
- xii.how to use main action button
- xiii.how to use LAN communication interface
- xiv.how to work WiFi with PC software
- VIII.Technical Specifications
- IX. Appendix
９
III. PC Configuration Requirements
Minimum System Requirement
CPU:
Pentium® 4/ 2.4 GHz
Internal Memory:
1GB
Effective Hard Disk Space:
1GB
Recommended System Requirement
CPU:
Pentium® Dual-Core/ 2.4 GHz
Internal Memory:
2GB
Effective Hard Disk Space:
2GB
Other Requirement
Operating System:
Windows 10, or Windows 8 / 7
/ Vista / XP (32-bit, or 64-bit)
Communication Interface:
USB 2.0, or USB1.1; LAN
LCD Resolution:
1024 x 768, or above