TI332 Handheld Thermal Imaging Camera User Manual V1.
TI332 Handheld Thermal Imaging Camera User Manual Version Date Modified Author Approved By Note number V1.
Contents 1 2 OVERVIEW .............................................................................................. 1 1.1 APPEARANCE .................................................................................... 1 1.2 POWER ON/OFF ................................................................................. 6 1.3 QUICK MEASUREMENT ........................................................................... 6 1.4 SAVE, DELETE AND VIEW INFRARED THERMAL IMAGE ................................
2.2.3.2 2.2.4 3 Alarm below threshold ............................................. 29 WiFi ................................................................................ 29 2.2.4.1 Enable and Disable WiFi ............................................ 29 2.2.4.2 WiFi Configuration .................................................. 29 2.2.5 LED ................................................................................. 30 2.2.6 More ...........................................................
1.Overview 1 Overview 1.
1.
1.
1.
1.
1.Overview 1.2 Power On/Off Press “Return & Power” key >1 second to power on TI332 handheld thermal imaging camera, the thermal imaging will display later. Press “Return & Power” key >3 seconds to power off TI332 handheld thermal imaging camera If TI332 handheld thermal imaging camera has any abnormal issue, Press “Return & Power” key >8 seconds to force shutdown the camera. 1.
1.Overview Point the lens at the measured object as shown in the figure below, and the infrared image of the measured object will be displayed on the screen.
1.
1.
1.
1.Overview As shown in the figure below, you can save the thermal image and visible light image by pressing the "trigger button" or "OK & Homepage", and press the "Return & Power" to cancel saving.
1.Overview 1.4 Save, Delete and View Infrared Thermal Image Power on the thermal camera. Point the lens to the object. Press the "trigger" to freeze the thermal image and visible light image, continue to press the "trigger" or "OK & Homepage" to save the thermal image and visible light image, press the "Return & Power" cancel saving.
1.Overview Press Return will view the saved thermal images and visible images.
1.
1.Overview o 3rd frame: the raw image frame of visible light image In the album, press "OK & Homepage" to preview the image in full screen. You can view the 3 frames of each picture by using the up and down arrow keys. The left and right arrow keys select the previous or next picture. When previewing the picture in full screen, press "OK & Homepage" to choose deleting the picture, press "Return & Power" to return to the album.
1.Overview 1.5 Main Page 1. Current Emissivity 2. Hot spot, cold spot and central spot 3. Time 4. WiFi 5.
1.Overview 6. Color bar 7. Second level menu 8. First level menu 1.6 Control and trigger keys According to the below description to operate control and trigger keys, "OK & Homepage" is only used as the homepage key to open the menu when the main page interface is turned on, other times as the Ok key. Use the arrow keys to select the direction of the scroll menu and settings. "Return & Power" short press as the return key, press> 3 seconds to power off the camera.
1.Overview 1.7.2 Export Picture There are several methods to export camera pictures, When the thermal imaging camera is power on, connect the camera USB interface to the computer with the accessory's USB cable. A USB drive letter will appear on the computer. You can select the pictures to copy to the computer. When the thermal imaging camera is power on, turn on WiFi, and copy the pictures of interest to the computer through the analysis software.
2.Operation and Settings 2 Operation and Settings 2.1 Main Page Operation 2.1.1 Quick Operation 2.1.1.1 Quick Switch Color Palettes When there is no menu on the main page, you can press the left and right arrow keys to quickly switch between 8 types of color palettes. For details about color palettes, see 2.1.3.4 Color palette. (If the main page displaying visible light image, you cannot switch color palette) 2.1.1.
2.Operation and Settings 2.1.2 First Level Menu Power on the camera, press the "OK & Homepage" to display the first-level menu and the status bar on the top. In this state, press the "Return & Power" to close the first-level menu and status bar. The icon selected in the menu is the current operable function, and there is a text prompt on the top of icon. No.
2.Operation and Settings Temperature measurement options, such as displaying the highest and lowest temperature. 3 Measurement Select the image display mode, such as picture-in-picture, outline fusion etc. 4 Image Mode Select the effect of the image, such as high contrast, gentle and so on. 5 Thermal AGC Select the infrared thermal imaging palette, such as iron, white hot, etc. 6 2.1.
2.Operation and Settings 2.1.3.1 Measurement The function is shown below, No. Function No 1 Icon Description Cancel all measurement measurements Measure the center point temperature of the 2 Center spot thermal imaging camera Track and measure the highest temperature 3 Hot spot points imaged by the camera Track and measure the lowest temperature 4 Cold spot point imaged by the camera Select part of the area for temperature 5 Zone measurement Zoom in or out the zone.
2.Operation and Settings 2.1.3.2 Image Mode The function is shown below, No.
2.Operation and Settings 2.1.3.3 Thermal AGC The function is shown below, No. Function Icon Description Choose high contract mode to view infrared 1 High contrast 2 Legacy thermal image Choose legacy mode to view infrared thermal image Choose gentle mode to view infrared thermal 3 2.1.3.
2.Operation and Settings The function is shown below, No. 2.2 Function 1 Tyrian 2 White Hot 3 Black Hot 4 Rainbow 5 Glory 6 Iron 7 Hottest 8 Coldest Icon Description Settings The settings interface is shown below, 2.2.
2.Operation and Settings No.
2.Operation and Settings 2.2.2 Emissivity Select the emissivity in the setting interface, and press "OK & Homepage" to set different emissivity of the object, or you can manually edit the emissivity. No. 2.2.3 Emissivity Value 1 Matt 0.95 2 Semi-matt 0.80 3 Semi-glossy 0.60 4 Glossy 0.30 5 Edit Emissivity Customization Temperature alarm Select the temperature alarm in the setting interface, and press "OK & Homepage” to alert the temperature above or below the threshold on the screen.
2.Operation and Settings 2.2.3.1 Alarm above threshold Edit the upper limit alarm value, and then turn on the upper limit alarm switch (these two steps are in no particular order). If the temperature value in the screen area is higher than the set threshold temperature, an alarm icon will pop up on the screen. When the temperature value in the screen area is lower than the set threshold temperature, the alarm icon will disappear.
2.Operation and Settings 2.2.3.2 Alarm below threshold Edit the lower limit alarm value, and then turn on the lower limit alarm switch (these two steps are in no particular order). If the temperature value in the screen area is higher than the set threshold temperature, an alarm icon will pop up on the screen. When the temperature value in the screen area is lower than the set threshold temperature, the alarm icon will disappear. 2.2.4 WiFi 2.2.4.
2.Operation and Settings 2.2.5 LED Select the LED in the setting interface, and press "OK & Homepage" to turn the LED on or off. 2.2.6 More Select More in the setting interface, and press "OK & Homepage" to set more settings.
2.Operation and Settings 2.2.6.1 Temperature Unit Temperature unit support below, Celsius Fahrenheit Kelvin 2.2.6.2 Storage In the storage option, you can view the current and used capacity of the internal storage memory, and you can choose to format the storage memory.
2.Operation and Settings 2.2.6.3 Date Date setting can set the current date and time.
2.Operation and Settings 2.2.6.
2.Operation and Settings 2.2.7 Temperature Bar This option can display or not display temperature bar in the home page. 2.2.8 Brightness This option can adjust the brightness of the screen. 2.2.9 Restore factory settings Restore factory settings will perform default factory settings on the handheld thermal imaging camera. Please proceed with caution. 2.2.10 About In the about option can view the basic information of the thermal imaging camera.
2.
3.Maintenance 3 Maintenance 3.1 Battery Service and Replacement If the battery cannot be charged and needs to be replaced, please contact your local distributor for repair and replacement. 3.2 Calibration The camera is calibrated in the factory. If calibration is required, please contact your local distributor. 3.3 Clean If necessary, wipe the case with a damp cloth. Use high-quality lens cleaning products to wipe off the dust or stains on the instrument lens and display.
4.Specification 4 Specification The specification of TI332 is below, Parameter Infrared Thermal Imaging Specification Resolution 320x240 Frequency band 8~14um Frame rate 9Hz NETD 70mK@25°C Field of view Horizontal 34.4°, vertical 25.8 Lens 6.
5.Appendix TIFF format, support full frame pictures File format Image analysis Interface temperature analysis Windows platform analysis Provide professional analysis functions to analyze software full pixels temperature analysis Android platform analysis Provide professional analysis functions to analyze software full pixels temperature analysis USB Type-C（Support battery charging and data Data and charging interface transmission） 5 Appendix 5.
6.Technical Support Plaster 0.80 - 0.90 Iron oxide 0.78 - 0.82 Stucco 0.89 - 0.91 textile 0.9 brick 0.93 - 0.
