User Manual

4.Panel Operation

4.6 Set Automatic Output at Power-on

The user can turn on or turn off the "automatic output at power-on" function by

pressing and holding the On/Off function key for 3 seconds.

（1） The steps are as follows The user can turn on or turn off the "automatic output

at power-on" function by pressing and holding the On/Off function key for 3

seconds. The steps are as follows:

（2） When the "automatic output at power-on" is turned off, after power-on, the

instrument is in the standby state. The user needs to manually perform the

"On/Off" operation, then the instrument will output.

4.7 Display

Press the Display function key to choose to display the measurement data in