SPD 2100-M Smart Pet Water Fountain Quick Start Guide
Safety Notice WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Smart Pet Water Fountain and other property. Read all the safety notices below before using the Smart Pet Water Fountain. • Avoid high humidity or extreme temperatures. • Avoid long exposure to direct sunlight or strong ultraviolet light. • Do not drop or expose the unit to intense vibration. • Do not disassemble or try to repair the unit yourself.
Technical Specifications Hopper Capacity • 2L Pump Flow • 220l/h Pump Head Power Adapter Material Dimension N. W. Color • 0.4m-1.5m • DC 5V 1A • ABS Plastic • 190 x 190 x 165 mm • 0.
1 Welcome The Pet water fountain allows you to feed your pet automatically and help your pet get in the habit of drinking water on his own, which will make your pet healthier. This guide will provide you with an overview of the product and help you get through the initial setup.
2 In the box • Pet Feeder x 1 • Filter Cotton x 2 • Micro USB cable x 1 • Quick Guide x 1 Please check the condition and the accessories of water fountain after you open the box.
3 Get to know your device Flower Drinking tray Cotton filter Tray Water level window Water bucket Base 7
Indicator Mode switch Trunking Non-slip mad Micro USB Port 8
4 Get started Figure 1 Figure 2 1. Take out the water fountain and internal accessories; 2. Rinse the water bucket and the outlet pipe with clean water; 3. Insert the outlet pipe into the outlet hole of the silent water pump, and press it firmly; 4. Add water to the water bucket, and do not exceed the highest water level; 5. Install the tray; 6. Rinse the filter box with clean water and put it into the tray filter box slot; 7. Install drinking tray; 8.
•Indicator The indicator's status gives the following information: Indicator's status Device's status Blue light is always on. Purple light is always on.
