Daim Ntawv Qhia Tus Neeg Siv
10
Reset button
Reset: Press and hold the reset button for 10 seconds until
the LED light ashes three times at third second, and it will
ash for three times again at tenth second.
4.1 To get started, you will need:
• A Zigbee Gateway.
• A mobile phone with a mobile APP installed.
4.2 Adding to the gateway's network
1. Set your gateway to permit joining (see your gateway's
manual).
2. Power on the Multi-sensor and press the reset button once
to make sure the LED indicator is ashing red (If not, reset it
Congure Network
4