Users Manual

To prevent other injuries, please observe the following regulations:
In order to prevent damage to the machine, the following situations should
be avoided:
Do not rub the screen with hard objects, otherwise it will scratch or permanently
damage the screen.
Do not press the screen with your fingers for a long time, otherwise it will cause
smearing and damage the screen in severe cases. If possible, try to use the
recommended resolution for best results. If using Resolutions other than the
recommended resolution may cause screen abnormalities, but this is Features of
fixed-resolution LCD panels. The static picture stays on the screen for a long time,
Cause damage and produce afterimages, please make sure to use a screen saver,
afterimages and related issues Not within the scope of product warranty. If you
encounter any technical problems while using this equipment For technical problems,
please contact professional technical service personnel or dealers.
1. When you leave for a long time, please turn off the monitor power,
2. Do not let children throw or insert objects into the monitor;
3. Do not install spare parts that are not specifically designed for this equipment:
4 When the equipment is left unattended for a long time, unplug the power cord:
5. When lightning strikes, please do not touch the power line or signal line, it may
cause electric shock hazard;
6. Don't let any objects press or twist the power cord;
7. Do not place the monitor where it is easy to damage the power cord.
1. Put the monitor in a place where it is easy to fall:
2. Place the monitor near a radiator or heat source;
3. The power cord is the main isolation device and must be placed in an
easy-to-operate place;
Security Information
2