® WeatherLock Specialty Tile & Metal Waterproofing Barrier Installation Instructions Barrera impermeabilizante para techos de tejas y metal WeatherLock ® WEATHERLOCK SPECIALTY TILE & METAL WATERPROOFING BARRIER ®
For sloped residential buildings with wood decks WeatherLock® underlayment installed between the roof deck and metal or tile roofing helps to lock out damage from wind-driven rain and ice damming. This exclusive Owens Corning™ Roofing composition is engineered for use under metal or tile.
Installation 3. Unroll WeatherLock underlayment and cut into 10' to 20' lengths, depending on size of job. Allow it to relax for 3–5 minutes before installing. Reroll each portion. Remove the first two feet of the release backer and press the product into place. Overlap the bottom edge (eave) by 1⁄4 ". While supporting the roll with one hand, remove the release backer with the other hand and press or roll into place.
Precautions Precauciones 1. WeatherLock underlayment should be installed by a 1. La membrana impermeabilizante WeatherLock debe ser professional roofing contractor. instalada por un contratista profesional especializado en la instalación de techos. 2. WeatherLock underlayment is designed to be covered by roofing material. Protection from sunlight is required to 2. La membrana impermeabilizante WeatherLock está diseñada assure its long-term performance. para estar cubierta por material para techos.
