Dimensions Guide

Starter Strip shingle advantages:
Speeds installation and helps improve safety.
Starter Strip shingle eliminates the need to cut off tabs or
headlap.
Saves labor. It’s easy for a single person to position Starter
Strip shingle on the roof.
Maximum compatibility. Use with any shingle that has an
exposure of up to 6".
Improves job quality. Puts the sealant appropriately at the
eaves.
Cost savings. There’s no need to cut down 3-tab shingles
to use as a starter strip.
Clean look. Starter Strip shingle provides a straight edge at
the eave and along the rake.
Exceptional bonding strength. Continuous sealant
ensures an effective seal between the starter and the fi rst
course of shingles.
Convenient. One (1) bundle provides 1 square of material
(105 lineal feet of actual coverage).
Goes on right—right away
Starter Strip shingle from Owens Corning™ Roofi ng – eliminates the need for cutting shingle tabs to create a starter
row, helping to save installation time and money! It’s a component of the Owens Corning™ Total Protection Roofi ng
System™^.
1. Starter Strip is packaged two pieces per
shingle, 16 shingles per bundle, 105 lineal
feet.
2. Perforation down the center allows for
easy separation.
3. Once apart, the Starter Strip shingles
should be aligned next to one another with
the sealant toward the eave.
Starter Strip Shingle
Starter Strip Shingles are a component of the Owens Corning™ Total Protection Roofi ng System.™
^