Instructions / Assembly

STARTER SHINGLE ROLL

FOR EAVE & RAKE EDGE

Cut Time—Not Tabs

Introducing Starter Shingle Roll from Owens Corning,

the largest manufacturer of world-class roofing materials.

This product eliminates the need for cutting shingle

tabs or inverting them to create a starter row. So you

save time.

Easy Application

Application is a snap too.Simply apply a single course of

Starter Shingle Roll along a clean, dry and smooth eave

line or rake edge, after removing the release sheet.Apply

the Starter Shingle Roll directly onto the WeatherLock

underlayment or a layer of felt. Once it is pressed into

place, you’re ready to begin shingling. (See application

instructions on back.)

The Starter Shingle Roll advantages:

• Eliminates time-consuming tab cutting or

shingle flopping

• Comes in handy individual rolls, measuring

7.2" x 33'4"

• Easy peel-and-stick application

• Requires no special tools, hardware or training

• Compatible with the Oakridge

PRO Series

™

WeatherGuard

HP, Prominence,

Supreme

and Classic

shingles

PAGE 1
STARTER SHINGLE ROLL FOR EAVE & RAKE EDGE Cut Time—Not Tabs Introducing Starter Shingle Roll from Owens Corning, the largest manufacturer of world-class roofing materials. This product eliminates the need for cutting shingle tabs or inverting them to create a starter row. So you save time. Easy Application Application is a snap too. Simply apply a single course of Starter Shingle Roll along a clean, dry and smooth eave line or rake edge, after removing the release sheet.
PAGE 2
STARTER SHINGLE ROLL APPLICATION INSTRUCTIONS Before installing this product, check roofing manufacturer’s application instructions and local building codes for their roofing requirements. Starter Shingle Roll: 1.Eave Application: Align Starter Shingle Roll with eave edge, granular side up with the seal strip closest to the outer edge of the roof. Remove the release backer and press or roll Starter Shingle Roll to assure full adhesion to the underlayment. See Fig. 1 2.