Specification

ManualsBrandsOwens Corning ManualsBuilding materialsR-13 Kraft Faced Insulation Roll 15 in. x 32 ft.

THIS IS NOT A CONSTRUCTION DOCUMENT. Edit carefully to coordinate with specific project requirements.

User must determine suitability of this guide specification in whole or in part for their particular project.

Owens Corning

Fiberglass Batt Insulation

Guide Specification 07 21 16 - 1

PINK Next Gen

™

FIBERGLAS

™

INSULATION

Guide Specification SECTION 07 21 16

Fiberglass Batt Insulation

SPECIFIER'S RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in

conjunction with good construction practice and professional judgment. This guide is to aid in the creation of a complete building

specification that is to be fully reviewed and edited by the engineer. Sections of this guide should be included, edited, or omitted based on

the requirements of a specific project. It is the responsibility of both the specifier and the purchaser to determine if a product or system is

suitable for its intended use. Neither Owens Corning, nor any of its subsidiary or affiliated companies, assume any responsibility for the

content of this specification guide relative to actual projects and specifically disclaim any and all liability for any errors or omissions in

design, detail, structural capability, attachment details, shop drawings or other construction related details, whether based upon the

information provided by Owens Corning or otherwise.

SECTION 07 21 16

FIBERGLASS BATT INSULATION

PART 1 — GENERAL

1.1 SUMMARY

A. Section Includes: Fiberglass batt thermal insulation for exterior envelope assemblies.

B. Related Sections:

1. Section 07 21 00 - Mineral Wool Insulation.

2. Section 07 21 18 - Glass Fiber Blanket Insulation.

3. Section 09 81 16 - Acoustic Blanket Insulation.

1.2 SUBMITTALS

A. Product Data: Submit product characteristics, performance criteria, and limitations, including installation

instructions.

B. Sustainable Design: Submit manufacturer’s sustainable design certifications as specified with each product.

1.3 QUALITY ASSURANCE

Sustainable Design: Provide products which have received the following certifications:

UL Certified Environmental Product Declaration in accordance with ISO 14025. Applies to PINK Next Gen™

Fiberglas™ Insulation Faced and Unfaced insulation.

GREENGUARD Indoor Air Quality Certified

and GREENGUARD Children & Schools Certified℠, applies

to PINK Next Gen™ Fiberglas™ Insulation Unfaced Batts and PINK Next Gen™ Fiberglas™ Insulation

Faced Batts and Rolls.

GREENGUARD Formaldehyde Free, applies to PINK Next Gen™ Fiberglas™ Insulation Unfaced and PINK

Next Gen™ Fiberglas™ Insulation Faced Batts and Rolls.

Scientific Certification Systems SCS-MC-01025, SCS Certified minimum 65% recycled glass content (with at

least 41% post-consumer recycled and the balance of pre-consumer recycled glass content), applies to PINK

Next Gen™ Fiberglas™ Insulation Unfaced Batts and Rolls.

Scientific Certification Systems SCS-MC-02676, SCS Certified minimum 58% recycled glass content (with at

least 36% post-consumer recycled and the balance of pre-consumer recycled glass content), applies to PINK

Summary of content (4 pages)

PAGE 1
THIS IS NOT A CONSTRUCTION DOCUMENT. Edit carefully to coordinate with specific project requirements. User must determine suitability of this guide specification in whole or in part for their particular project.
PAGE 2
THIS IS NOT A CONSTRUCTION DOCUMENT. Edit carefully to coordinate with specific project requirements. User must determine suitability of this guide specification in whole or in part for their particular project. B. C. Next Gen™ Fiberglas™ Insulation Faced Batts and Rolls. Mock-Up: If requested, provide a mock-up of materials proposed for use for review of workmanship. Accepted mock-ups may remain in place. Preconstruction Meeting: Convene a minimum of two weeks prior to commencing work of this section.
PAGE 3
THIS IS NOT A CONSTRUCTION DOCUMENT. Edit carefully to coordinate with specific project requirements. User must determine suitability of this guide specification in whole or in part for their particular project. 1. Tape: Polyethylene self-adhering type for Kraft faced insulation and bright aluminum self-adhering type for foil faced insulation. 2. Insulation Fasteners: Impale clip of galvanized steel; type recommended by insulation manufacturer for particular use intended. 3.
PAGE 4
THIS IS NOT A CONSTRUCTION DOCUMENT. Edit carefully to coordinate with specific project requirements. User must determine suitability of this guide specification in whole or in part for their particular project. B. have been tested and inspected. Provide written report listing conditions detrimental to performance of work in this section. Do not proceed with installation until unsatisfactory conditions have been corrected. 3.2 INSTALLATION A.