Information

Copyright © 2018 Owens Corning. All Rights Reserved.
Contact: [e-mail]
Storage and
safety
STORAGE
XSTRAND™ filaments must be stored in a dry and temperate location. The product should remain in its original
packaging, preferably closed, until beginning of use.
- GF30-PP product is not very sensitive to moisture and does not require to be unclosed in a dry environment during
printing.
- GF30-PA6 is very sensitive to moisture and must be dried at least 4h in the oven at 80°C prior to use to allow
optimal printing results. The spool needs to be stored in a dry case (Pelican type) even during printing.
SAFETY
Material Safety Data Sheet available here.
During use of the products, extrusion fumes may be released. Ensure sufficient ventilation and air extraction to avoid
inhalation. In case of insufficient ventilation, wear suitable respiratory equipment.
If you apply a sand process after printing your part, make sure you wear safety gloves and appropriate dust mask.
Storage and safety conditions
Products
applications
Products
references
3D Printer
settings
Owens Corning
Customer
testimonial
Value
proposition
Products
presentation
Contact & Orders