Specification

Disclaimer of Liability
Technical information contained herein is furnished without charge or obligation and is given and
accepted at recipient’s sole risk. Because conditions of use may vary and are beyond our control,
Owens Corning makes no representation about, and is not responsible or liable for the accuracy
or reliability of data associated with particular uses of any product described herein.
SCS Global Services provides independent verification of recycled content in building
materials and verifies recycled content claims made by manufacturers. For more information,
visit www.SCSglobalservices.com.
Certifications and Sustainable Features
• Unfaced EcoTouch
®
Insulation and Kraft-Faced EcoTouch
®
Insulation are participating in Declare and are Living Building
Challenge Compliant
• Certified by SCS Global Services to contain an average of 55%
recycled glass content, 18% pre-consumer and 37% post-
consumer
• GREENGUARD Certified products are certified to
GREENGUARD standards for low chemical emissions into
indoor air during product usage. For more information,
visit ul.com/gg
• Environmental Product Declaration (EPD) has been certified by
UL Environment
• Material Health Certificate from Cradle to Cradle Products
Innovation Institute
Pub. No. 10019001-I. Printed in U.S.A. July 2018.
THE PINK PANTHER™ & © 1964–2018 Metro-Goldwyn-Mayer Studios Inc.
All Rights Reserved. The color PINK is a registered trademark of Owens Corning.
© 2018 Owens Corning. All Rights Reserved.
OWENS CORNING INSULATING SYSTEMS, LLC
ONE OWENS CORNING PARKWAY
TOLEDO, OHIO, USA 43659
1-800-GET-PINK
®
www.owenscorning.com
Foil Faced—EcoTouch
®
Batt Insulation
Fiberglass insulation designed to improve thermal and acoustic
performance of wall and roof/ceiling assemblies. Fits tightly in metal
framing to allow for friction fit installation. Flanges can be inset or face
stapled as needed. Different sizes available to fit specific applications.
• ASTM C665 Type III, Class B and C
• ASTM E84 75/150
• ASTM C1338 Mold/mildew resistant
• ASTM C518
• ASTM E90, E413 (3½", 6¼")
• ASTM E96 Perm Rating 0.5
 R-11 3½"
 R-13 3½"
 R-15 3½"
 R-19 6¼"
 R-30 9½"
Kraft Faced— PROPINK
®
FastBatt
™
Insulation
Fiberglass insulation with PureFiber
®
Technology designed to
improve thermal and acoustic performance of wall and roof/ceiling
assemblies. Fits tightly in wood framing to allow for friction fit
installation. Different sizes available to fit specific applications.
• ASTM C665 Type II, Class C
• ASTM E84 not rated
• ASTM C1338 Mold/mildew resistant
• ASTM C518
• ASTM E90, E413 (3½", 6¼")
• ASTM E96 Perm Rating -1 perm
 R-13 3½"
 R-15 3½"
 R-19 6¼"
 R-21 5½"
Unfaced— EcoTouch
®
Sonobatts
®
Insulation
Fiberglass insulation with PureFiber
®
Technology designed to
improve thermal and acoustic performance of suspended ceiling
assemblies. 24" x 48" to fit on top of most drop in ceiling tiles.
• ASTM C665 Type I
• ASTM E84 <25/<50
• ASTM C1338 Mold/mildew resistant
• ASTM E136 Non-Combustible
• ASTM C518
• ASTM E90, E413 (3½", 6¼")
• UL File #BKNV 3576 (Fire rated assemblies)
 R-11 3½"  R-19 6¼"
Kraft Faced— EcoTouch
®
Sonobatts
®
Insulation
Fiberglass insulation with PureFiber
®
Technology designed to
improve thermal and acoustic performance of suspended ceiling
assemblies. 24" x 48" to fit on top of most drop in ceiling tile.
• ASTM C665 Type II, Class C
• ASTM E84 Not Rated
• ASTM C1338 Mold/mildew resistant
• ASTM E96 perm Rating -1 perm
• ASTM C518
• ASTM E90, E413
 R-11 3½"
 R-13 3½"
 R-19 6¼"
Unfaced—EcoTouch
®
QuietZone
®
Acoustic Batt
Insulation
Fiberglass insulation designed to improve acoustic performance of
wall assemblies. Fits tightly in wood framing to allow for friction fit
installation. Different sizes available to fit specific applications.
• ASTM C665 Type I
• ASTM E84 <25/<50
• ASTM C1338 Mold/mildew resistant
• ASTM E136 Non-Combustible
• ASTM E90, E413 (3½", 5½")
• UL File #BKNV 3576 (Fire rated assemblies)
 3½"  5½"
Kraft Faced—EcoTouch
®
QuietZone
®
Acoustic
Batt Insulation
Fiberglass insulation designed to improve acoustic performance of
wall assemblies. Fits tightly in wood framing to allow for friction fit
installation. Flanges can be inset or face stapled as needed. Different
sizes available to fit specific applications.
• ASTM C665 Type II, Class C
• ASTM E84 Not Rated
• ASTM C1338 Mold/mildew resistant
• ASTM E90, E413 (3½")
• ASTM E96 Perm Rating -1 perm
• UL File #BKNV 3576 (Fire rated assemblies)
 3½"
Visit www.ocbuildingspec.com to access a variety of learning, application and design resources to
build your spec. For current product availability, please contact an Owens Corning Distributor or Area
Sales Manager.