Technical Specifications

Product Data Sheet
FANFOLD
Foam Residing Board
• Packaging – ¼ ” product
shipped in units of 45 bundles
per pallet,
3
∕8” product
shipped in units of 30
bundles per pallet.
• Underwriters Laboratories Inc
classi ed. See Classi cation
Certi cate U-350.
Installation Instructions
Easy to Handle and Install
FANFOLD foam residing board is
a lightweight foam insulation
board that unfolds quickly to
cover a 4 by 50 foot (200 square
foot) area. The lightweight
bundles can be cut to  t with a
common utility knife, thus saving
labor costs. The faced side of the
product shall be exposed to
exterior weathering. FANFOLD
foam residing boards should avoid
prolonged exposure to sunlight.
The new siding material should be
installed as soon as possible after
FANFOLD foam residing board
installation.
Caution: Like many construction
materials, FANFOLD foam
residing board is combustible. Do
not expose the product to open
 ame during shipping, storage,
installation or use. This product
should be installed in accordance
with applicable building codes.
OWENS CORNING FOAM INSULATION, LLC
ONE OWENS CORNING PARKWAY
TOLEDO, OHIO 43659
1-800-GET-PINK
®
ww w.owenscorning.com
Pub. No. 23247-D. Printed in U.S.A. February 2010. THE PINK
PANTHER™ & ©1964-2010 Metro-Goldwyn-Mayer Studios Inc. All Rights
Reserved. The color PINK is a registered trademark of Owens Corning.
©2010 Owens Corning.
Disclaimer of Liability
Technical information contained herein is furnished
without charge or obligation and is given and accepted
at recipient’s sole risk. Because conditions of use may
vary and are beyond our control, Owens Corning makes
no representation about, and is not responsible or
liable for the accuracy or reliability of data associated
with particular uses of any product described herein.
Nothing contained in this bulletin shall be considered a
recommendation.